Sharps rifle

Sharps rifle

Type Rifle, Carbine
Place of origin  United States
Service history
In service 1850–1881
Production history
Designer Christian Sharps
Designed 1848
Number built 100,000+
Variants carbine
Specifications
Weight 9.5 lb (4.3 kg)
Length 47 inches (1,200 mm)

Cartridge .52-caliber 475-grain projectile with 50-grain (3.2 g) cartridge, later converted to.50-90 Sharps in 1874.
Action Falling Block
Rate of fire 8–10 shots per minute
Muzzle velocity 1,200 ft/s (370 m/s)
Effective range 500 yd (460 m)
Maximum range 1,000 yd (910 m)
Feed system 1 round
Sights open ladder type

Sharps rifles were those of a series that began with a design by Christian Sharps. Sharps rifles were renowned for long range and high accuracy in their day.

Contents

History

Sharps's initial rifle was patented September 17, 1848[1] and manufactured by A. S. Nippes at Mill Creek, (Philadelphia) Pennsylvania

The second model used the Maynard tape primer, and surviving examples are marked Edward Maynard - Patentee 1845. In 1850 the second model was brought to the Robbins & Lawrence Company of Windsor, Vermont where the Model 1851 was developed for mass production. Rollin White of the R&L Co. invented the knife-edge breech block and self-cocking device for the "box-lock" Model 1851. This is referred to as the "First Contract", which was for 5,000 Model 1851 carbines - of which approximately 1,650 were produced by R&L in Windsor.

In 1851 the "Second Contract" was made for 15,000 rifles and the Sharps Rifle Manufacturing Company was organized as a holding company with $1,000 in capital and with John C. Palmer as president, Christian Sharps as engineer, and Richard S. Lawrence as master armorer and superintendent of manufacturing. Sharps was to be paid a royalty of $1 per firearm and the factory was built on R&L's property in Hartford, Connecticut.

The Model 1851 was replaced in production by the Model 1853. All Sharps rifles were manufactured in Windsor until October 1856. Christian Sharps left the company in 1853; Richard S. Lawrence continued as the chief armorer until 1872 and developed the various Sharp models and their improvements that made the rifle famous.

The 1874-pattern Sharps was a particularly popular rifle that led to the introduction of several derivatives in quick succession. It handled a large number of .40- to .50-caliber (most commonly the .50-90 Sharps) cartridges in a variety of loadings and barrel lengths.[2][3]

Hugo Borchardt designed the Sharps-Borchardt Model 1878, the last rifle made by the Sharps Rifle Co. before its closing in 1881.

Reproductions of the paper cartridge Sharps M1859 and M1863 Rifle and Carbine, the metallic cartridge 1874 Sharps Rifle, and Sharps-Borchardt Model 1878 are being manufactured today. They are used in Civil War re-enacting, hunting and target shooting.

Sharps military rifles and carbines

The military Sharps rifle (also known as the Berdan Sharps rifle) was a falling block rifle used during and after the American Civil War.[4] Along with being able to use a standard percussion cap, the Sharps had a fairly unusual pellet primer feed. This was a device which held a stack of pelleted primers and flipped one over the nipple each time the trigger was pulled and the hammer fell - making it much easier to fire a Sharps from horseback than a gun employing individually loaded percussion caps. 

The Sharps Rifle was produced by the Sharps Rifle Manufacturing Company in Hartford, Connecticut. It was used in the Civil War by the U.S. Army sharpshooters, known popularly as "Berdan's Sharpshooters" in honor of their leader Hiram Berdan. The Sharps made a superior sniper weapon of greater accuracy than the more commonly issued muzzle-loading rifled muskets. This was due mainly to the higher rate of fire of the breech loading mechanism and superior quality of manufacture.

Sharps military carbine

The carbine version was very popular with the cavalry of both the Union and Confederate armies and was issued in much larger numbers than the full length rifle. The falling block action lent itself to conversion to the new metallic cartridges developed in the late 1860s, and many of these converted carbines in .50-70 Government were used during the Indian Wars in the decades immediately following the Civil War.[4]

Some Civil War-issue carbines had an unusual feature: a coffee mill in the stock.[5]

Sharps sporting rifles

Sharps made sporting versions from the late 1840s until the late 1880s. After the American Civil War, converted Army surplus rifles were made into custom firearms, and the Sharps factory produced Models 1869 and 1874 in large numbers for commercial buffalo hunters and frontiersmen. These large-bore rifles were manufactured with some of the most powerful black powder cartridges ever made. Sharps also fabricated special long-range target versions for the then-popular Creedmore style of 1,000-yard (910 m) target shooting. Many modern black powder cartridge silhouette shooters use original and replica Sharps rifles to target metallic silhouettes cut in the shapes of animals at ranges up to 500 meters. Shiloh Rifle Manufacturing Company, and C Sharps Arms of Big Timber, Montana, have been manufacturing reproductions of the Sharps Rifle since 1983 and 1979, respectively.

In film

Movies which showed the strengths of the Sharps rifle are the 1990 western Quigley Down Under where Tom Selleck's title character's Sharps rifle has a 34" barrel as opposed to a standard length barrel of 30" and Burt Lancaster's character, Bob Valdez, in the movie Valdez Is Coming.[6] As a result of Quigley Down Under a Sharps match is held annually every year in Forsyth, Montana known as the "Quigley Match". A 44-inch target is placed at 1,000 yards for each shooter, remniscent of a scene from the movie.[7] Theater Crafts Industry went so far as to say, "In Quigley Down Under, which we did in 1990, the Sharps rifle practically co- stars with Tom Selleck."[8] This statement was echoed by gunwriters including John Taffin in Guns and Lionel Atwill in Field & Stream.[6][9] Gun manufacturers such as Davide Pedersoli and Shiloh Rifle Manufacturing Company have credited these movies with an increase in demand for those rifles.[6]

See also

Notes

  1. ^ IMPROVEMENT IN BREECH-LOADING FIRE-ARMS retrieved 20 September 2008 from Google.
  2. ^ The Guns that Won the West: Firearms of the American Frontier: 1848-1898, John Walter, 2006, p. 129-133
  3. ^ Guns of the Old West, Dean Boorman, 2004, p. 44-47
  4. ^ a b Hogg, Ian V.(1987) Weapons of the Civil War. New York: Military Press, ISBN 0517636069.
  5. ^ Strategy Page (accessed 00.45 13 June 2011
  6. ^ a b c Taffin, John (1994). "The Sharps 1874". Guns Magazine (Harris) 41 (5): 60–63. "That movie has done for the Sharps rifle what Dirty Harry did for the Smith & Wesson .44 Magnum back in the 1970's." 
  7. ^ Van Zwoll, Wayne (2008). Hunter's Guide to Long-Range Shooting. Stackpole Books. pp. 27–28. ISBN 9780811733144. 
  8. ^ TCI: the business of entertainment technology & design, Volume 29(1995)
  9. ^ Atwill, Lionel (1997). "The Return of the Buffalo Gun". Field & Stream 102 (9): 50–53. "In truth Tom Selleck must share credit with the movie's real stars; Quigley's .45-110 Sharps" 

References

External links